Mass Flow Meters (including “smart units”)
• Brooks, Sierra
• Laminar flow from 0 to 100 slpm
• Sonic flow from 250 to 2500 slpm
• Liquid/Ultrasonic/Transit Time
Validation Test Equipment
• Data Acquisition Systems
• GE-Kaye Validator KL, 2000 and older
• SIM Modules for Validator 2000
• GE-Kaye Smart RTD
• Probes IRTD 400; 500
• Wireless Dataloggers
• Lives
Temperature Equipment
• Fluidized Temperature Blocks/Baths
• Dry Temperature Blocks
• Precision Thermometers
• Ice Point Reference Cells
• Secondary RTD Thermometers
• Industrial RTD Thermometers
• Thermocouple Thermometer (probes or wirebead, typical use)
• Thermocouple Thermometers (probes or wirebead, high temperature application)
• Infrared Thermometers
• Temperature Transmitters
• Temperature Controllers
• Temperature Loggers
• Glass & Dial Thermometers
• Psychrometers, Dual Matched Thermometers
Analytical Equipment
• Filter Integrity Testers
• Bottle Cap Testers
• Heat Sealers
• Moisture Analyzers
• Uv-VIS, FTIR, Bioluminescence
• Spectrophotometers
• Atomic Absorption Analyzers
• Nitrogen Analyzers
• Titrators (Karl Fisher, Potentiometric, Volumetric)
• Polarimeters
• Viscometers (cPoise, DU, or shear-rate Rheometers)
Process Instrumentation (DC and Low Capability)
• Power Meters (KW)
• Frequency Calibrators
• Milliamp Calibrators Loop Calibrators
• DC Voltage Calibrator
• Multifunction Process Calibrators
• Decade Boxes, Resistance & RTD simulation
• Thermocouple Calibrators
• Digital Multimeters
• Current Clamp on Meters
• Ohmmeters
• Dataloggers
• Recorders
• Tachometers
• Conductivity Test Fixtures (sticks)
• Timers & Stopwatches
• Oscilloscopes
• Voltage and Current Standards (Secondary & Working Grade)
Relative Humidity (Rh) Equipment
• Dewpoint Meters, 15 ppmV to 75 ppmV
• Humidity Transmitter
• Humidity/Temperature Meters
• Humidity/Temperature Dataloggers
• Humidity/Temperature Chart Recorders
• 3 point Humidity & Temp Cal.
• Model 2500 Benchtop / Mobile (400 pounds) "Two-Pressure" Humidity Generator
Miscellaneous Equipment
• Force Gauges, compression or tension
• Liquid Flow measurement
• Pipettes: fixed & adjustable piston, single or multiple piston repeator
• Torque Analyzers
• Wrenches, Gauges
Specialized Testing
• Air Flow Anemometer, 30 to 9,000 SCFM (Diameter 4 inches or less)
• Particle Counter, Testing from .5 to 5 micron
• High Temperature to 1100 °C
• PH/Conductivity
• TOC Conductivity Standards
• Process Photometers
Mass Calibrations
• All ASTM & NIST-class weights, from 25 kilograms (55 lbs.) to 1 milligram
• ASTM Class Weights 1-7 & OIML Class E2, F1, F2, M1, M2, M3
Pressure Equipment
• Vacuum, 0.4mmHgA to 1000 mmHgA
• Barometers
• High Vacuum Calibrators
• Vacuum Gauges, Indicators
• Very Low Pressure, 0-60.000.H20
• Draft Pressure Sensors
• Manometers
• Hook Gauges
• Standard Pressure, 0-500 PSI
• Calibrators
• Modules, Gauges, Indicators
• Pressure Switches
• Medium to High Pressure, 500-16,000 PSI
• Deadweight Testers
• Gauge Comparators
• Modules, Gauges, Indicators
Metrology Laboratory
Housed in our new facility is our state-of-the-art 8,000 sq. ft. Metrology, Mass, TOC and Pipette Laboratories where we provide calibration and repair services for all major brands of equipment. Both temperature and humidity controlled through energy efficient geothermal HVAC, the Laboratory is outfitted with the latest standards. In addition the Metrology Lab is ANSI Z540 compliant and is accredited to ISO/IEC 17025:2005 with a demonstrated ability to perform specific calibration tests. Every instrument calibration is performed by trained technicians according to manufacturer’s specifications using established procedures and in full compliance with ISO guidelines.
Our Metrology Lab uses very sophisticated test and measurement equipment and is comprised of ergonomically functionally workbenches designated for specific applications; i.e., pressure, temperature, mass flow, particle counters, DC Low, humidity, etc. In addition, we have a variety of dedicated and patented equipment for highly specialized applications.
All of our calibration services use standards of accuracy traceable to NIST. Certificates of Calibration are provided with all applicable NIST or certificate trace number(s). Click here to request a copy. We maintain a complete documentation control system allowing us to best assess your needs and schedule services accordingly. In addition, our rigorous quality assurance program monitors the services being provided by our Metrology Lab to ensure complete customer satisfaction.
We also have a library of more than 600 standard operating procedures (SOPs) including our recently updated SOP for calibrating particle counters either in our Metrology lab or in the field to the new ISO 21501 standard.
Our standard turnaround time for calibrating equipment is 5 business days. We provide regional pickup and delivery as well as emergency service and rush orders. Also 24 hour service is available upon request. Click here to inquire.
To see a complete list of manufacturer's equipment that we service please click here.
For more information on any of the following calibration services, click on each link.
